GGFORUMSGAMING COMMUNITY

THREAD FILE

GPU Issues After Cleaning

@Darran's avatarOPENED BY @DarranMAY 15, 2022, 5:56 AM
35VIEWS11REPLIES
I decided to clean my graphics card (Gigabyte 3060 Ti) after hearing a buzzing noise from my GPU while playing games. I disassembled it, cleaned the fans and heat sink, then reassembled it. Then I put it back in my computer and started playing games, and when the GPU fans revved up, they were much, much louder than before. The fans would cycle between ~2000 and 2800 RPM, and any time it would ramp up, the fans would become much louder than before I had cleaned them.I thought I might not have screwed everything in well enough, so I took apart my GPU again and paid extra attention to the reassembly and making sure things were tight. But I'm still having the same problem and now more issues.After the second reassembly, I've had my screens turn black once, and every time the GPU fans rev up to ~2600 RPM, my computer will stutter. My GPU seemed to be sitting at a consistent 79C, and the fans at ~2000 RPM until they would spike to 2800, causing stuttering.Everything was working completely fine up until I decided to clean my GPU.I don't even know where to begin. Please help.My specs are:GPU - Gigabyte Geforce 3060 TiCPU - Ryzen 5 5600xMobo - Gigabyte X570 Aorus Elite WifiRAM - 2x Corsair Vengeance 16GB 3600 CL18PSU - Corsair 750W 80+ Bronze
It might be a hardware problem you should take your computer to a computer shop to fix it.
@Shafin wrote:
It might be a hardware problem you should take your computer to a computer shop to fix it.
Maybe it is need go to fix it
@Darran wrote:
I decided to clean my graphics card (Gigabyte 3060 Ti) after hearing a buzzing noise from my GPU while playing games. I disassembled it, cleaned the fans and heat sink, then reassembled it. Then I put it back in my computer and started playing games, and when the GPU fans revved up, they were much, much louder than before. The fans would cycle between ~2000 and 2800 RPM, and any time it would ramp up, the fans would become much louder than before I had cleaned them.I thought I might not have screwed everything in well enough, so I took apart my GPU again and paid extra attention to the reassembly and making sure things were tight. But I'm still having the same problem and now more issues.After the second reassembly, I've had my screens turn black once, and every time the GPU fans rev up to ~2600 RPM, my computer will stutter. My GPU seemed to be sitting at a consistent 79C, and the fans at ~2000 RPM until they would spike to 2800, causing stuttering.Everything was working completely fine up until I decided to clean my GPU.I don't even know where to begin. Please help.My specs are:GPU - Gigabyte Geforce 3060 TiCPU - Ryzen 5 5600xMobo - Gigabyte X570 Aorus Elite WifiRAM - 2x Corsair Vengeance 16GB 3600 CL18PSU - Corsair 750W 80+ Bronze
You should get your PC checked up. I'm pretty sure it will not cost much.
Wow that is nice post I like this post very much
You should get your PC checked up. Maybe it is need go to fix it.
You just need clear it carefully with not weat stuff
Thanks for this Information There are many issues occur after cleaning GPU
I like your specs Thanks For this Information
Maybe watch videos on youtubes.You might get help there.Good luck fixing it
When cleaning the graphics card, compressed air in a can or an air compressor will be your primary cleaning tool. If there is caked-on dust and dirt, you can use a Q-tip with isopropyl alcohol to rub them away. You can clean other computer parts with a damp cloth or cloth with small amounts of isopropyl alcohol.
OPEN CHANNEL // THREAD REPLY

ADD TO THE SIGNAL.

Share a reaction, theory, question, discovery, or evidence. Keep it useful and on topic.

POSTING GUARDRAILSUP TO 20,000 CHARACTERS10-MIN GRACE + 5 EDITSEDIT DURING THE FIRST 2 HOURS3 IMAGES / MEMBER / TOPIC1 VIDEO EMBED / POST · NO UPLOADS2 ACTIVE LINKS / MEMBER / TOPIC